Gay Cruising Place In Kakinada

A logo for the HTML 5

Who if it were lost, the top one is the official logo of HTML 5, released last January 18.
from that stated the developers of the WHATWG (Web Hypertext Application Technology Working Group) since version 5, will break the numbering. In short, although constantly updated, the name of the language markup will remain unchanged.
Personally, I await the new HTML without prejudice and with great expectations. If every now argues on some blog or forums with the "anti-Taliban Flash", is only for a certain rigidity in their reasoning. As I wrote, in my humble opinion, both technologies are intended to live together sharing the market according to different areas of expertise. Also, think that technology is more friendly on the basis of personal taste, will automatically sell more websites, is at best illusory. In any case, should be completed by May all the features and then have to wait for the adjustment of the major browser vendors to tutte le specifiche.
Chiudo segnalando ioProgrammo speciale html5 e css3 . Si tratta di un ottimo numero fuori serie che affronta l'html del futuro sotto vari punti di vista. La rivista è stata distribuita a Gennaio, ma dovrebbe essere reperibile ancora per qualche giorno.

Smoke Detector Troubleshooting

On the banks of the River Fireworks

Nel numero 22 di Anch’io Siti Web (in questi giorni in edicola) è possibile trovare il mio articolo su Fireworks CS5. 
Rileggendo l ’introduzione del mio articolo mi è tornata in mente una storiella divertente avvenuta nel lontano 2001. All’epoca avevo iniziato a collaborare come docente per il Cepu, che at that time was launching computer course dedicated to the web. We new recruits were all young, enthusiastic and full of hopes. The first team meeting had just ended, and as always happens in these cases, we were all gathered around his head (hello Peppe) for some ass to lick. One word led to another and we ended up talking about Fireworks, which was then still being manufactured by Macromedia. I had the unfortunate idea to utter a banality, and that is that you create and export Fireworks graphics and bitmaps, and vector graphics. I just finished my pearl of wisdom to bestow his chest swelling like a turkey, which a colleague (Hello Fabio), I denied without appeal. According to him
Fierworks simulated some vector effect, but there was only a bitmap program. remember less than our exchange.
- Me: But that creates vector objects can be exported to other vector programs!
- He: Export a manner of speaking. It 's all stuff simulated. The program is bitmap.
- Me: But if there is a little key that lets you switch between work in the bitmap vector!
- He: Pure crap. The key is not to blame. The program is bitmap.
still remember the reaction of the head. She looked at us puzzled, and end the bickering stopped recommending not to contradict front of the students. But I perceived clearly that he believed his version. Having reason I did win the fight. The reason? Fabio had a lot of experience, a good dialectic, and the ability to know how to sell.
was also a real filibuster. He had taken the new company without ever having left the old one. And by the way the jealous of the other proprietary computer school (hello Vincenzo) was not ever know.
But I was still very inexperienced and incompetent. I remember that night I was there pretty bad. Then we buried the hatchet with Fabio of war and basically established a good relationship. Then he left that job before me and we lost touch.
Ten years later, I published an authoritative collectible the same definition that I was challenged at the time, and I have even paid for it. Apparently karma exists ...

In Url:live View/-axis

LOGOS operators TIM, Vodafone, H3G - VALID FOR ALL AND ALL DEVICE IOS!

And after the success of the bundle operator Wind, here is my new art work: The operator logos of all the other Italian managers!

The installation procedure is very simple, download the logo of your operator depending on the model of your iPhone from my repository (cydia.myrepospace.com / fosseperme) and activate it through winterboard!

H3G NB If you have, you should download the logo is the logo that three three tim roaming and activate them both in winterboard.

Gatsby Wax Motto Slogan

GUIDE: How to successfully run the IOS Untethered Jailbreak 4.2.1 iPhone 4 - MAC USERS ONLY - NEED ECID FW 4.2BETA3!

few weeks ago, the iPhone Dev Team has released the latest beta version of Redsn0w 0.9.7, namely the sixth, going to correct a number of flaws and bugs found in previous releases. Among these were corrected, two major problems encountered by users with Bluetooth and Skype. However, according to segnalatoci when some users, not everyone is able to correctly use the Skype application on their iPhone after using Redsn0w. In this article we will then explain how to successfully jailbreak your Untethered device on the Mac platform

Although concerned in each case of a program still in beta, the latest release of Redsn0w is rather stable and also easy to use, so it can also be used by inexperienced users as long as they meet certain requirements, including:

• file. ipsw firmware 4.2.1 iPhone 4 ( download ).
• file. Ipsw firmware iPhone 4.2 beta 3 of 4 (download ).
• The certificate SHSH IOS 4.2 beta 3 (you can notify the rescue via Cydia or TinyUmbrella ).

Once verified these basic requirements, you can proceed with the guide.

Needed

• Redsn0w 0.9.7b6 ( download ).
• OS Mac OS X.
• 4 iPhone updated to 4.2.1 iOS original.

Note: iPhone 3G and 3G (iBoot old) are already running the 4.2.1 Jailbreak Untethered IOS simply using the old version of Redsn0w (0.9.6b4). The new iPhone 3G instead iBoot must of course follow this guide by obtaining the files. Ipsw firmware 4.2.1 and 4.2 beta 3 for iPhone 3G (find links on the net!) And having the certificate of SHSH 4.2 beta 3 saved on Cydia.

Guide

1. First, if you have not already done so, you will need to update your device using iTunes. To do this we connect the iPhone to your Mac using the special cable that are supplied with the phone. Once the device is recognized by the system, you open iTunes. Spostetevi in \u200b\u200bthe "Summary" section and click, hold down the ALT key on the "Restore". Then select, using the appropriate box, the. Ipsw firmware 4.2.1 and proceed with the automatic update of the iPhone. Once the upgrade is complete, you can configure the iPhone using iTunes.

2. Updated iPhone to 4.2.1 iOS, and possibly after the restored backup data (you can still do the jailbreak after you run), run Redsn0w 0.9.7b6 and click on "Browse" and select the file. Ipsw firmware 4.2 .1 that you previously used to update your iPhone. After a few moments, it will be recognized by Redsn0w. Then click on "Next" and proceed. Redsn0w prepare the necessary files for the Jailbreak.

3. Check the only option "Install Cydia" in Redsn0w and click on "Next".

We will be asked to make sure that the iPhone is turned off and connected to your Mac's click on "Next" and prepare to set the device in DFU, we will have to do it (again by phone turned off and connected to the USB )

• Press the Power button for 5 seconds.
• Press the Home button and hold the Power for 8-9 seconds.
• Release the Power button and keep pressing Home for another 3-4 seconds.
• Your device will now be in DFU mode (black screen).

In any case you will be guided by Redsn0w in setting the device in DFU mode.

4. At this point, after entering DFU mode, the process is automatic and Redsn0w run a series of commands, only on Mac first, then also on the iPhone, until you receive a nice pineapple on the device display. Finally, the iPhone will restart in tethered mode and will have been completed the first phase of the operation of Jailbreak. At this point we run again Redsn0w, we follow the same steps listed in Steps 2 and 3, taking care, however, not to tick the "Install Cydia" and activate the other hand, the "Just boot tethered right now." In this way, after you set the iPhone in DFU again (by phone turned off and connected to the USB), it will reboot and you can use Cydia.

5. Now connect your iPhone to your Mac, then open iTunes, and restore the old backup (if you have not already). In any event, even if not reversed, it is very important , if you want to use Skype without crashing and problems once you jailbreak Untethered, verify that the above application is installed via iTunes on the iPhone and is perfectly functional.

6. Redsn0w open again, we follow the same steps set out in section 2 (file selection. Ipsw firmware 4.2.1 and confirmation) and then check off just "Jailbreak Mount." Then select, after you press "Next" file. Ipsw firmware 4.2 beta 3. Confirm the operation and expect Redsn0w recognize the firmware in question (of course everything on the phone is turned off and connected to the USB DFU mode).

7. Again, Redsn0w perform several commands, on both the Mac and the device connected. The procedure, however, may be slightly longer than that of Jailbreak. Recall that the technique "Monte", created by the Dev Team, Jailbreak allows you to switch from one type of semi-tethered, like the one we performed earlier, for an Untethered without having to restore the iPhone. Once the process is complete your iPhone will reboot.

8. We're finished! Now you can enjoy a full Jailbreak, stable and without any problems. The bug in Skype and Bluetooth are in fact completely disappeared. To verify the authenticity of this information, and to realize if you have done correctly or not the operation of Jailbreak, just go into Settings> General and see if the "Bluetooth" is active and can be changed; for Skype, however, simply launch the ' application and verify that it works correctly.

NB For those who do not have Skype installed on your device before you perform step 6 (Jailbreak Monte), Skype will crash at startup again. However, you can easily solve replaying again redsn0w 0.9.7b6, then selecting the 4.2.1 firmware ipsw file but leaving empty in this case all following cells and proceeding with the device in DFU off and connected to the USB. Will repeat the jailbreak mountain (do not worry, nothing happens to your device!) And restart Skype to work. This operation is necessary in the removal and subsequent reinstallation of Skype from the device or update the same application.

White Bumps Inside Nose

GUIDE EXCLUSIVE TONY'S BLOG - Carrier Bundle Wind 3G/3GS/4 fw 4.2.1 iPhone! OPERATOR LOGO + + NO POPUP CALL FORWARD BUTTON HACK CREDIT

This guide made by me is finally able to show the logo wind (retina iPhone version 4), to disable the annoying pop-up call forwarding and voicemail replace the button with the credit 3G/3GS/4 with IOS on iPhone 4.2.1 ( probably less work for firmware 4.x).

1) Download here the patch for CommCenter by Wortel fixata iDevice and valid for all and for all versions of IOS 4.x (deb format), it is important that you use the file posted here as there are different versions of this CommCenter but many are not functional.

2) Download the file here IPCC Bundle Wind iPhone 4 (made by me) you are going to upload via Itunes ; here instead found the iPhone version 3G/3GS.

3) Go in SSH (using WinSCP, Cyberduck or iFile) and go in the path / var / root / Media. Here you create a folder called Cydia and then another call within this AutoInstall (write the names of the folders exactly as I wrote them myself!). Finally, in the AutoInstall folder copy the deb file you downloaded.

4) Restart the iPhone (according to the alerts do it twice, since otherwise you might have trouble viewing the logo) and you will find the patch for CommCenter installed by Wortel correctly (you will find the installed package in cydia and also install the deb file will be removed from the AutoInstall folder).

5) At this point (if you have not already) you need to enable iTunes in the loading of custom IPCC. To do this you must:

* On Mac: Open the terminal and run this command defaults write

com.apple.iTunes carrier-testing-bool TRUE

* On Windows : open Run this command and paste

% ProgramFiles% \\ iTunes \\ iTunes.exe / setPrefInt carrier-testing a

* Su Windows 7 : Start – cercate Esegui ed incollate questo comando

C:\Program Files (x86)\iTunes\iTunes.exe /setPrefInt carrier-testing 1


6) Ora aprite Itunes con l'iPhone collegato al pc, tenete premuto il tasto shift e cliccate su Verifica aggiornamenti, dopodichè selezionate il file ipcc precedentemente scaricato.

7) Adesso avrete il vostro bundle Wind perfettamente funzionante, con logo operatore e popup inoltro chiamata disabilitato. Se ancora non lo visualizzate fate un riavvio del telefono e tutto dovrebbe andare.

8) L'ultima cosa che vi manca è sostituire la grafica del tasto segreteria con quello del credito (infatti se provate a cliccare su segreteria vi rimanderà già al link del credito grazie alla modifica fatta dal mio bundle); per fare questo aggiungete su Cydia la repository henry.simplythebest.it/cydia e installate da questa il pacchetto denominato "Credito Hack Retina (fw 4.x)" nel caso di iPhone 4, "Credito Hack (fw 4.x)" nel caso di iPhone 3G/3GS. Effettuate un respring e ora dovreste avere anche la nuova grafica del credito.

N.B. Se al termine della procedura non dovesse piacervi il logo operatore e volete ripristinare quello originale, mantenendo le altre modifiche, procedete come segue. Recatevi in SSH (tramite WinSCP,Cyberduck o anche iFile), go to the location var / mobile / Library / Carrier Bundles / iPhone / WIND_Italy.bundle png and rename the two files present, inserting the word "nologo" (without quotation marks) just before the extension. png
Save and restart, and now You should review the original logo, if you want to see the logo again, delete the words from the two png nologo, bringing the message as it was before. If the logo you do not like and want to replace them with another at will, replace the two png files with others, making sure they have the same name as before.


NB This guidance secretary will send back the key to the string * 123 # or the service that lets you check your credit on rechargeable wind. If you want to make sure that key is associated with another service (such as wind have subscribed and want to attach it to another number or string to check your remaining minutes and text messages), proceed as follows. Go in ssh in the path var / mobile / Library / Carrier Bundles / iPhone / WIND_Italy.bundle (this is always the folder in which to "play") and copy the file to your desktop carrier.plist

Open it with a text editor (I recommend TextPad for Windows) and find the words

ServiceCode

* 123 #

Instead of * 123 # enter the number or the string of service to which you want to wind the key associate secretary and save the file, then again via ssh to replace the old one and restart the phone.

UPDATE: CommCenter amended by Wortel and files "Credit Hack Retina (fw 4.x)" and "Credit Hack (fw 4.x)" are now available in my new repository cydia.myrepospace.com / fosseperme